Site Map

Translate
ABOUT ERIKS UKCONTACT USNEWSERIKS UK RSS News FeedPRESS RELEASESERIKS UK RSS Press Release FeedLOCATIONSCAREERSERIKS Careers RSS FEED
Close

Turbo Generator Rotors Repair

Request a Turbo Generator Rotors Repair Call-back
Turbo Generator Rotors
Turbo Generator Rotors
Turbo Generator Rotors
Turbo Generator Rotors
Turbo Generator Rotors
Turbo Generator Rotors
Turbo Generator Rotor Repair refurbishment and rewind of Turbo Generator Rotors of all types and designs. The Turbo Generator Rotor Repair Service includes:
  • The removal of the turbo generator rotor end bells and steel wedges from the turbo generator rotor body, utilising a temperature controlled electrical and mechanical process.
  • The end bells will then be tested ultrasonically to determine their long term fitness for use and reinsulated with Class H or C insulations.
  • Windings can be cleaned to remove carbon and other contaminants and damaged insulations and blocking supports can be repaired or replaced.
  • Total windings can be removed and replaced with annealed insulated copper conductors. Insulated with purpose designed Class H or C system of high mechanical strength designed to withstand the centrfugal forces of over 3000RPM on the windings.
  • Diagnostic testing at all stages of the processing.
  • Final turbo generator rotor testing static and at speed.

The following service centres provide this product and service:-


Share This Page

Email:

Turbo Generator Rotors Repair

Copyright ©2009 ERIKS UK
All trademarks acknowledged.
All rights reserved.
ERIKS Industrial Services Limited
Registered Office : Amber Way, Halesowen,
West Midlands, B62 8WG
Registered Number : 3142338
Fenner is a registered trademark of J. H. Fenner & Co. Limited.

View the ERIKS UK Privacy Statement Here
Sunday 5th July 2009 - 00:20:08 GMT - ID:702