All items marked with an asterisk (*) are required. SEND REQUEST

Split Bearing Housings

Housings are horizontally split and have two or four attachment bolt holes in the base as SRBstandard. The basis of the plummer block housing system consists of a number of housings of the same design but in different sizes.  By combining these housings with different standard seals a wide variety of housing variants, all belonging to the standard range, can be supplied.

Plummer blocks can tyoically accommodate shaft diameters ranging from 20 to 160 mm. The housing base is reinforced with ribs and extra material surrounding the holes for the attachment bolts in order to improve seating on the base plate.  The attachment bolts can be preloaded to give better location and cannot deform the housing base or housing bore. 

Housings have two attachment bolt holes in the base as standard.

Revolvo SRB standard support Revolvo SRB flange support Revolvo SRB take up tension unit Revolvo SRB take up pull unit Revolvo SRB hangar unit
Standard support with complete hosuing and bearing Flange support Take up tension unit complete with hosuing Take Up Pulll Unit Hangar Unit