Are you Storing your Oils & Liquids Correctly?
The incorrect storage or poor management of Oils & Liquids, can have far reaching consequences for your business and the environment and, although The Oil Storage Regulations are amongst some of the most highly publicised regulation currently in force, it's all too easy to forget that all liquids pose a potential threat to health, safety and the environment if not properly stored and handled.
It's relatively straight forward to ensure that you are protected by using products specifically designed for the task, the RX range illustrated below will ensure your meet all current regulations.
Who needs to comply?
All Industrial, Commercial or Institutional sites storing 200 litres or more of oil or fuel above ground in one or more containers.
In Scotland, the regulations apply to both the indoor & outdoor storage of Oils & Fuels. In England & Wales the regulations only apply to storage outside. However, it is considered šBest Practice' to use suitable containment for products stored indoors.
If there is any risk of Oils or Fluids entering the Water Course - such as an internal drain, secondary containment should be used.
RX Spill Trays
Manufactured from tough polyethylene the RX spill trays are suitable for use in labs or at dosing stations, available in three different sizes they are ideal for the safe storage of bottles and drums from 0.5 litre to 25 litre capacity.
RX Sump Flooring
Again, manufactured from polyethylene, our low profile drum sump floor can be used as a stand alone unit or combined with others to create unlimited bunded areas, units are joined together with plastic connectors to inter-link the sumps and the injection moulded mesh floor. Available in three different sizes.
RX Spill Pallets
Manufactured from medium density polyethylene (MDPE), the RX spill pallets comply with the guidelines issued by both the Environment Agencies (PPG26) and the Oil Storage Regulations. They are suitable for use across a broad range of chemicals.
RX Spill Pallets for IBC's
Manufactured from medium density polyethylene (MDPE), the large capacity IBC spill pallets are suitable for use with most common sizes of intermediate bulk containers (IBC) and comply with the 110% regulations. The design is rugged enough to withstand constant use across a broad range of chemicals.